R3102-R3103-HP 6600/HSR6600 Routers High Availability Command Reference

47
Received Time: 02/3/6 13:01:34
One or more streams of cross-connect CCMs is received. The last-received CCM:
Maintenance domain:mdtest1
Maintenance association:matest1
MEP:6 Sequence Number:0x63A
Received Time: 02/3/6 13:01:34
Some other MEPs are transmitting the RDI bit.
Table 16 Command output
Field Descri
p
tion
Interface Interface that an MD belongs to.
Maintenance domain MD that a MEP belongs to.
Maintenance association MA that a MEP belongs to.
Level Level of the MD.
VLAN VLAN that the MA belongs to.
Direction Direction of the MEPs.
Administrative state State of MEP, either Active or Inactive.
CCM send Whether the MEP sends CCM.
FNG state
State of FNG (Fault Notification Generator):
• FNG_RESET—A fault has been cleared.
• FNG_DEFECT—A fault has been detected.
• FNG_REPORT_DEFECT—Report a fault.
• FNG_DEFECT_REPORTED—A fault has been reported.
• FNG_DEFECT_CLEARING—A fault is being cleared.
If this field is not supported, a hyphen (-) is displayed.
CCM Information related to CCM.
Current state
State of CCMs sent:
• CCI_IDLE—Initial state.
• CCI_WAITING—Sending state.
Interval Interval to send CCM.
SendCCM
Number of CCMs that have been sent by the MEPs.
If this field is not supported, a hyphen (-) is displayed.
Loopback Information related to Loopback.
NextSeqNumber Sequence number of the next LBM to be sent.
SendLBR
Number of LBRs that have been sent. If the MEP is inward-facing, the number
of LBRs will not be counted.
ReceiveInOrderLBR Number of LBR messages received in correct sequence.
ReceiveOutOrderLBR Number of LBR messages received out of order.
Linktrace Information related to linktrace.
NextSeqNumber Sequence number of the next LTM to be sent.