R3102-R3103-HP 6600/HSR6600 Routers High Availability Command Reference

51
Default command level
1: Monitor level
Parameters
service-instance instance-id: Specifies the service instance ID in the range of 1 to 32767.
mep mep-id: Specifies the ID of a remote MEP, in the range of 1 to 8191.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the information of remote MEP 10 in service instance 4.
<Sysname> display cfd remote-mep service-instance 4 mep 10
MEP ID MAC Address State Time MAC Status
20 00E0-FC00-6565 OK 2009/03/06 02:36:38 UP
30 00E0-FC27-6502 OK 2009/03/06 02:36:38 DOWN
40 00E0-FC00-6510 FAILED 2009/03/06 02:36:39 DOWN
50 00E0-FC52-BAA0 OK 2009/03/06 02:36:44 DOWN
60 0010-FC00-6502 OK 2009/03/06 02:36:42 DOWN
Table 18 Command output
Field Descri
p
tion
MEP ID ID of the remote MED.
MAC Address
MAC address of the remote MEP device.
If this field is not supported, a hyphen (-) is displayed.
State Running state of the remote MEP: OK or FAILED.
Time Time when the remote MEP entered the FAILED or OK state for the last time.
MAC Status
State of the port indicated by the last CCM received from the remote MEP: UP
or DOWN.
If this field is not supported, a hyphen (-) is displayed.
display cfd service-instance
Use display cfd service-instance to display the configuration information of service instance.
Syntax
display cfd service-instance [ instance-id ] [ | { begin | exclude | include } regular-expression ]
Views
Any view