R3102-R3103-HP 6600/HSR6600 Routers High Availability Command Reference

73
RPRPOS1/1 Ringlet1 Slave Up
Bind information on interface: RPR2
Smart-connection: Enabled/Connected
PHY-Interface Ringlet-ID Role Mate-Port
---------------------------------------------------
None N/A N/A N/A
None N/A N/A N/A
Table 25 Command output
Field Descri
p
tion
Bind information on interface Binding information of an RPR logical interface.
Smart-connection:
Enabled/Connected
State of the RPR mate port smart connection function and connection state of
the mate ports:
• Enabled/Connected—The RPR mate port smart connection function is
enabled, and the mate ports have been connected internally.
• Enabled/Disconnected—The RPR mate port smart connection function is
enabled, and the mate ports are not connected internally.
• Disabled—The RPR mate port smart connection function is disabled.
PHY-Interface Physical port bound to the RPR logical interface.
Ringlet-ID
Binding relationship between the physical port and the RPR logical
interface:
• Ringlet0—The physical port is the west interface.
• Ringlet1—The physical port is the east interface.
• N/A—No binding relationship exists.
Role Role of the physical port. It can be Master, Slave, or N/A.
Mate-Port State of the mate port connected to the physical port.
display rpr defect
Use display rpr defect to display RPR defect information.
Syntax
display rpr defect [ rpr interface-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
rpr interface-number: Specifies an RPR logical interface by its type and number. If no RPR logical
interface is specified, this command displays the RPR defect information of the stations corresponding to
all the RPR logical interfaces on your device.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.