R3102-R3103-HP 6600/HSR6600 Routers High Availability Command Reference

74
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the ring defect information for RPR logical interface RPR 1.
<Sysname> display rpr defect rpr 1
RPR defects on interface: RPR1
Excess reserved rate defect: ringlet0: 0, ringlet1: 0
Jumbo configuration defect: 0
Maximum number of stations exceeded defect: 0
Miscabling defect: ringlet0: 0, ringlet1: 0
Protection mode configuration defect: 0
Inconsistent topology defect: 0
Topology instability defect: 0
IP address duplicate defect: 0
MAC address duplicate defect: 1
In the output, the value 0 means that no defects are present and 1 means at least a defect is present.
display rpr fairness
Use display rpr fairness to display information about RPR fairness parameters.
Syntax
display rpr fairness [ rpr interface-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
rpr interface-number: Specifies an RPR logical interface by its type and number. If no RPR logical
interface is specified, this command displays the RPR fairness settings of the RPR stations corresponding
to all the RPR logical interfaces on your device.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the RPR fairness settings for Layer 3 RPR logical interface RPR 1.
<Sysname> display rpr fairness rpr 1