R3102-R3103-HP 6600/HSR6600 Routers High Availability Command Reference

85
Field Descri
p
tion
Psw:protection state, west
Protection state of the west span:
Fs—Forced switch.
Sf—Signal fail.
Sd—Signal degrade.
Ms—Manual switch.
Wtr—Wait to restore.
Idle.
Ese:edge state, east
Edge state of the east span:
1—An edge has been detected.
0—No edge has been detected.
Esw:edge state, west
Edge state of the west span:
1—An edge has been detected.
0—No edge has been detected.
Wc:wrap protection configured
Wrap protection mode configured:
1—Wrapping mode.
0—Steering mode.
Jp:jumbo frame preferred
Indicates whether Jumbo frames are supported:
1—Supported.
0—Not supported.
Ring-level topology information on
interface
Topology information of the RPR station corresponding to the
specific interface.
Ringlet0 Number of stations on the west span.
Ringlet1 Number of stations on the east span.
Ring Total stations on the ring.
Jumbo-Prefer
Indicates whether Jumbo frames are supported:
Regular—Not supported.
Jumbo—Supported.
Topology-Type Ring status, either open ring or closed ring.
Local station topology information on
interface
Summary of local topology information of the station that
corresponds to the interface.
MAC-Address MAC address of the station.
IP-Address IP address of the station.
Station-Name Station name.
Station topology information on
interface
Topology summary for the other stations on the same ring to which
the specified interface belongs.
Station entry on ringlet0 Topology summary for the neighbor stations on the west span.
Station entry on ringlet1 Topology summary for the neighbor stations on the east span.
# Display the topology information of the local station.
<Sysname>display rpr topology local
Local station topology information on interface: RPR1