R3102-R3103-HP 6600/HSR6600 Routers High Availability Command Reference

90
flag j1 ignore
Use flag j1 ignore to ignore CRC of the J1 byte.
Use undo flag j1 ignore to restore the default.
Syntax
flag j1 ignore
undo flag j1 ignore
Default
CRC is performed for the J1 byte.
Views
RPRPOS interface view
Default command level
2: System level
Examples
# Ignore CRC of the J1 byte on interface RPRPOS 2/1/1.
<Sysname> system-view
[Sysname] interface rprpos 2/1/1
[Sysname-RPRPOS2/1/1] flag j1 ignore
frame-format
Use frame-format to set the framing format on the interface.
Use undo frame-format to restore the default.
Syntax
frame-format { sdh | sonet }
undo frame-format
Default
The framing format is SDH.
Views
RPRPOS interface view
Default command level
2: System level
Parameters
sdh: Sets the framing format to SDH.
sonet: Sets the framing format to SONET.
Examples
# Set the framing format on interface RPRPOS 2/1/1 to SONET.
<Sysname> system-view