R3102-R3103-HP 6600/HSR6600 Routers Interface Command Reference

136
Examples
# Enable error packets diffusion restraint.
<Sysname> system-view
[Sysname] error-diffusion restraint enable
ft1 alarm
Use ft1 alarm to enable RAI detection on the interface.
Use undo ft1 alarm to disable RAI detection on the interface.
Syntax
ft1 alarm detect rai
undo ft1 alarm detect rai
Default
RAI detection is enabled on an interface.
Views
T1-F interface view
Default command level
2: System level
Parameters
detect: Enables periodical detection on an interface.
rai: Remote Alarm Indication (RAI).
Usage guidelines
This command is applicable when the framing format on the interface is ESF.
Examples
# Disable RAI detection on interface Serial 2/0/0.
<Sysname> system-view
[Sysname] interface serial 2/0/0
[Sysname-Serial2/0/0] undo ft1 alarm detect rai
ft1 alarm-threshold
Use ft1 alarm-threshold to set LOS, AIS, or LFA alarm thresholds on the T1-F interface.
Use undo ft1 alarm-threshold to restore the default.
Syntax
ft1 alarm-threshold { ais { level-1 | level-2 } | lfa { level-1 | level-2 | level-3 | level-4 } | los
{ pulse-detection | pulse-recovery } value }
undo ft1 alarm-threshold { ais | lfa | los { pulse-detection | pulse-recovery } }
Views
T1-F interface view