R3102-R3103-HP 6600/HSR6600 Routers Interface Command Reference

233
Related commands
frame-format
ppp mp soft-binding
Use the ppp mp soft-binding command to configure the serial interface to use the software bundling
mode.
Use the undo ppp mp soft-binding command to restore the default.
Syntax
ppp mp soft-binding
undo ppp mp soft-binding
Default
The hardware bundling mode is used.
Views
Synchronous serial interface view
Default command level
2: System level
Usage guidelines
In software bundling mode, because packets are all fragmented and reassembled by the CPU, the serial
interface cannot be bundled with a large number of links.
In hardware bundling mode, because packets are fragmented and reassembled through hardware,
which frees the CPU from these tasks, the serial interface can be bundled with a large number of links.
The HIM-CL1P and HIM-CL2P interface modules do not support cross-port hardware MP bundling. On
these interface modules, you can use software bundling to meet cross-port MP requirements.
Examples
# Set the bundling mode of Serial 1/0/0/1:1 formed by bundles on CPOS 1/0/0 to software bundling.
<Sysname> system-view
[Sysname] controller cpos 1/0/0
[Sysname-Cpos1/0/0] t1 1 channel-set 1 timeslot-list 1-23
[Sysname-Cpos1/0/0] quit
[Sysname] interface serial 1/0/0/1:1
[Sysname-Serial1/0/0/1:1] ppp mp soft-binding
reset counters controller cpos
Use reset counters controller cpos to clear the controller counter of a CPOS interface.
Syntax
reset counters controller cpos interface-number
Views
User view