R3102-R3103-HP 6600/HSR6600 Routers Interface Command Reference

257
[Sysname-E-Cpos2/0/0] loopback remote
oc-12
Use oc-12 to create a 622 Mbps channel with the specified number in the view of a 2.5 Gbps E-CPOS
interface and enter the view of the 622 Mbps channel. If the specified 622 Mbps channel already exists,
you enter the view of the 622 Mbps channel directly.
Use undo oc-12 to remove the specified 622 Mbps channel and its subchannels.
Syntax
oc-12 oc-12-number
undo oc-12 oc-12-number
Views
2.5 Gbps E-CPOS interface view, OC-48 view
Default command level
2: System level
Parameters
oc-12-number: Number of a 622 Mbps channel, in the range of 1 to 4.
Examples
# Create the 622 Mbps channel OC-12 2 on 2.5 Gbps E-CPOS interface E-CPOS 2/0/0.
<Sysname> system-view
[Sysname] controller e-cpos2/0/0
[Sysname-E-Cpos2/0/0] oc-12 2
[Sysname-E-Cpos2/0/0-oc-12-2]
oc-3
Use oc-3 to create a 155 Mbps channel with the specified number in the view of a 622 Mbps E-CPOS
interface or channel and enter the view of the 155 Mbps channel. If the specified 155 Mbps channel
already exists, you enter the view of the 155 Mbps channel directly.
Use undo oc-3 to remove the specified 155 Mbps channel and its subchannels.
Syntax
oc-3 oc-3-number
undo oc-3 oc-3-number
Views
622 Mbps E-CPOS interface view, OC-12 view
Default command level
2: System level
Parameters
oc-3-number: Number of a 155 Mbps channel, in the range of 1 to 4.