R3102-R3103-HP 6600/HSR6600 Routers Interface Configuration Guide

65
Ste
p
Command Remarks
12. Configure overhead bytes for
VC-4 frames.
flag vc-4 path-number { c2 c2-value
| j1 { sdh sdh-string | sonet
sonet-string } | s1s0 s1s0-value }
Optional.
13. Configure the specified T3
channel to operate in FT3
mode and configure a DSU
mode or subrate for the FT3
channel.
ft3 t3-number { dsu-mode { 0 | 1 |
2 | 3 | 4 } | subrate sub-number }
Optional.
For an FT3 channel, the default
DSU mode is 0 (Digital Link) and
the default subrate is 44210 kbps.
Fractional T3 (FT3, or Subrate T3)
is a nonstandard application. With
FT3, you can subdivide the rate of
T3 into subrates depending on the
bandwidth requirements.
Configuring the working mode of an interface card
Some CPOS cards can be used for multiple purposes. After configuring a different working mode for a
card, you can switch its working mode. For more information about configuring the working mode of an
interface card, see Fundamentals Configuration Guide.
Displaying and maintaining CPOS interfaces
Task Command Remarks
Display information about
channels on a specified or all
CPOS interfaces.
display controller cpos [ cpos-number ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display information about a
specified E1 channel on a CPOS
interface.
display controller cpos cpos-number e1
e1-number [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display information about a
specified T1 channel on a CPOS
interface.
display controller cpos cpos-number t1
t1-number [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display information about a
specified E3 channel on a CPOS
interface.
display controller cpos cpos-number e3
e3-number [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display information about a
specified T3 channel on a CPOS
interface.
display controller cpos cpos-number t3
t3-number [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display information about an
E1/T1/E3/T3 serial interface.
display interface serial
interface-number/channel-number:set-num
ber [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Clear the controller counter of a
CPOS interface.
reset counters controller cpos
interface-number
Available in user view.