R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Command Reference

2
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port unit board: Mask(0x00)
Router port(s):total 1 port(s).
GE2/0/1 (D) ( 00:01:30 )
IP group(s):the following ip group(s) match to one mac group.
IP group address:224.1.1.1
(0.0.0.0, 224.1.1.1):
Attribute: Host Port
Host port unit board: Mask(0x10)
Host port(s):total 1 port(s).
GE2/0/2 (D) ( 00:03:23 )
MAC group(s):
MAC group address:0100-5e01-0101
Host port unit board: Mask(0x10)
Host port(s):total 1 port(s).
GE2/0/2
Table 1 Command output
Field Description
Total 1 IP Group(s). Total number of IP multicast groups.
Total 1 IP Source(s). Total number of multicast sources.
Total 1 MAC Group(s). Total number of MAC multicast groups.
Port flags: D-Dynamic port, S-Static
port, C-Copy port, P-PIM port
Port flags:
• D—Dynamic port.
• S—Static port.
• C—Port copied from a (*, G) entry to an (S, G) entry.
• P—Port added by PIM snooping.
Subvlan flags: R-Real VLAN,
C-Copy VLAN
Sub-VLAN flags: R for real egress sub-VLAN under the current entry, C for
sub-VLAN copied from a (*, G) entry to an (S, G) entry.
Router port unit board Mask indicating a board with a router port residing on it.
Router port(s) Number of router ports.
( 00:01:30 )
Remaining time of the aging timer for the dynamic member port or router
port.
To display the remaining time of a non-aggregate interface, you must
specify the number of the slot where the corresponding card resides by
using the slot slot-number option. For an aggregate interface, you do not
need to do this.
IP group address Address of IP multicast group.
(0.0.0.0, 224.1.1.1) (S, G) entry, where 0.0.0.0 implies any multicast source.
MAC group address Address of MAC multicast group.
Attribute Attribute of IP multicast group.
Host port unit board Mask indicating a board with a member port residing on it.