R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Command Reference

5
Received IGMPv3 reports:1.
Received IGMPv3 reports with right and wrong records:0.
Received IGMPv3 specific queries:0.
Received IGMPv3 specific sg queries:0.
Sent IGMPv3 specific queries:0.
Sent IGMPv3 specific sg queries:0.
Received error IGMP messages:19.
Table 3 Command output
Field Descri
p
tion
general queries Number of general queries.
specific queries Number of group-specific queries.
reports Number of reports.
leaves Number of leave messages.
reports with right and wrong records Number of reports with correct and incorrect records.
specific sg query packet(s) Number of group-and-source-specific queries.
error IGMP messages Number of IGMP messages with errors.
dot1p-priority (IGMP-snooping view)
Use dot1p-priority to set the 802.1p precedence for IGMP messages globally.
Use undo dot1p-priority to restore the default.
Syntax
dot1p-priority priority-number
undo dot1p-priority
Default
The 802.1p precedence for IGMP messages is 0.
Views
IGMP-snooping view
Default command level
2: System level
Parameters
priority-number: Specifies an 802.1p precedence for IGMP messages, in the range of 0 to 7. A higher
number indicates a higher precedence.
Examples
# Set the 802.1p precedence for IGMP messages to 3 globally.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] dot1p-priority 3