R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Command Reference

6
entry-limit (IGMP-snooping view)
Use entry-limit to set the global maximum number of IGMP snooping forwarding entries.
Use undo entry-limit to restore the default.
Syntax
entry-limit limit
undo entry-limit
Default
The maximum number is 1000.
Views
IGMP-snooping view
Default command level
2: System level
Parameters
limit: Specifies the maximum number of IGMP snooping forwarding entries, in the range of 0 to 1000.
Examples
# Set the maximum number of IGMP snooping forwarding entries to 512.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] entry-limit 512
fast-leave (IGMP-snooping view)
Use fast-leave to enable fast-leave processing globally. With this function enabled, when the switch
receives an IGMP leave message on a port of the SAP module, it directly removes that port from the
multicast forwarding entry of the specific group.
Use undo fast-leave to disable fast-leave processing globally.
Syntax
fast-leave [ vlan vlan-list ]
undo fast-leave [ vlan vlan-list ]
Default
Fast-leave processing is disabled.
Views
IGMP-snooping view
Default command level
2: System level
Parameters
vlan vlan-list: Specifies one or multiple VLANs. You can provide up to 10 VLAN lists. For each list, you
can specify an individual VLAN in the form of vlan-id, or a VLAN range in the form of start-vlan-id to