R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Command Reference

223
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? – incomplete
Network From Flaps Duration Reuse Path/Origin
*> 55.0.0.0 12.1.1.1 2 00:00:16 100?
*d 77.0.0.0 12.1.1.1 5 00:34:02 00:27:08 100?
Table 50 Command output
Field Descri
p
tion
From Source IP address of the route.
Flaps Number of routing flaps.
Duration Route flap duration.
Reuse Reuse time of the route.
For more information about the fields, see Table 47.
display bgp multicast routing-table peer
Use display bgp multicast routing-table peer to display IPv4 MBGP routing information advertised to or
received from the specified IPv4 MBGP peer.
Syntax
display bgp multicast routing-table peer ip-address { advertised-routes | received-routes }
[ network-address [ mask | mask-length ] | statistic ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
2: Monitor level
Parameters
ip-address: Specifies an IPv4 MBGP peer by its IP address.
advertised-routes: Specifies the advertised routes.
received-routes: Specifies the received routes.
network-address: Specifies the IP address of the destination network.
mask: Specifies the mask of the destination network, in dotted decimal notation.
mask-length: Specifies a mask length in the range of 0 to 32.
statistic: Specifies route statistics.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.