R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Command Reference

228
[Sysname] bgp 100
[Sysname-bgp] ipv4-family multicast
[Sysname-bgp-af-mul] import-route rip
ipv4-family multicast
Use ipv4-family multicast to enter IPv4 MBGP address family view.
Use undo ipv4-family multicast to remove all configurations made in IPv4 MBGP address family view
and return to MBGP view.
Syntax
ipv4-family multicast
undo ipv4-family multicast
Views
BGP view
Default command level
2: System level
Examples
# Enter IPv4 MBGP address family view.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family multicast
[Sysname-bgp-af-mul]
network (MBGP address family view)
Use network to inject a network to the IPv4 MBGP routing table.
Use undo network to remove a network from the IPv4 MBGP routing table.
Syntax
network ip-address [ mask | mask-length ] [ short-cut | route-policy route-policy-name ]
undo network ip-address [ mask | mask-length ] [ short-cut ]
Default
No network route is injected.
Views
IPv4 MBGP address family view
Default command level
2: System level
Parameters
ip-address: Specifies a destination IP address.
mask: Specifies a mask, in dotted decimal notation.
mask-length: Specifies a mask length in the range of 0 to 32.