R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Command Reference

290
Examples
# Display detailed MLD configuration and operation information on GigabitEthernet 2/1/1
(downstream interface).
<Sysname> display mld interface gigabitethernet2/1/1 verbose
GigabitEthernet2/1/1(FE80::200:AFF:FE01:101):
MLD is enabled
Current MLD version is 1
Value of query interval for MLD(in seconds): 125
Value of other querier present interval for MLD(in seconds): 255
Value of maximum query response time for MLD(in seconds): 10
Value of last listener query interval(in seconds): 1
Value of startup query interval(in seconds): 31
Value of startup query count: 2
General query timer expiry (hours:minutes:seconds): 00:00:23
Querier for MLD: FE80::200:AFF:FE01:101 (this router)
MLD activity: 1 joins, 0 leaves
Multicast ipv6 routing on this interface: enabled
Robustness: 2
Require-router-alert: disabled
Fast-leave: disabled
Ssm-mapping: disabled
Startup-query-timer-expiry: off
Other-querier-present-timer-expiry: off
Proxying interface: GigabitEthernet2/1/2(FE80::100:CEF:FE01:101)
Total 1 MLD Group reported
# Display detailed MLD configuration and operation information on GigabitEthernet 2/1/2 (upstream
interface).
<Sysname> display mld interface gigabitethernet 2/1/2 verbose
GigabitEthernet2/1/2(FE80::100:CEF:FE01:101):
MLD proxy is enabled
Current MLD version is 2
Multicast ipv6 routing on this interface: enabled
Require-router-alert: disabled
Version1-querier-present-timer-expiry: off
Table 68 Command output
Field Descri
p
tion
GigabitEthernet2/1/1(FE80::200:AFF:FE01:101) Interface and IPv6 link-local address.
Current MLD version MLD version running on the interface.
Value of query interval for MLD (in seconds) MLD query interval, in seconds.
Value of other querier present interval for MLD (in
seconds)
MLD other querier present interval, in seconds.
Value of maximum query response time for MLD (in
seconds)
Maximum response delay for general query messages
(in seconds).
Value of last listener query interval (in seconds) MLD last listener query interval, in seconds.
Value of startup query interval(in seconds) MLD startup query interval, in seconds.