R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Command Reference

293
Default command level
1: Monitor level
Parameters
ipv6-source-address: Specifies a multicast source by its IPv6 address.
ipv6-group-address: Specifies an IPv6 multicast group address in the range of FFxy::/16, where x and y
represent any hexadecimal number from 0 to F.
prefix-length: Specifies the address prefix length. The default value is 128. For a multicast source address,
the value range for this argument is 0 to 128. For a multicast group address, the value range for this
argument is 8 to 128.
flags: Specifies the route flag.
act: Displays the MLD routes with the ACT flag
suc: Displays the MLD routes with the SUC flag.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about the MLD routing table.
<Sysname> display mld routing-table
Routing table
Total 2 entries
00001. (*, FF1E::101)
List of 1 downstream interface
GigabitEthernet2/1/1 (FE80::200:5EFF:FE71:3800),
Protocol: MLD
00002. (100::1, FF1E::101), Flag: ACT
List of 1 downstream interface in include mode
GigabitEthernet2/1/2 (FE80::100:5E16:FEC0:1010),
Protocol: MLD
Table 70 Command output
Field Descri
p
tion
Routing table MLD routing table.
00001 Sequence number of this (*, G) entry.
(*, FF1E::101) (*, G) entry in the MLD routing table.