R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Command Reference

295
1::2
10::1
100::10
Table 71 Command output
Field Description
Group IPv6 multicast group address.
Source list List of IPv6 multicast source addresses.
Related commands
ssm-mapping
display mld ssm-mapping group
Use display mld ssm-mapping group to display information about the multicast groups created based on
the configured MLD SSM mappings.
Syntax
display mld ssm-mapping group [ ipv6-group-address | interface interface-type interface-number ]
[ verbose ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ipv6-group-address: Specifies an IPv6 multicast group address in the range of FFxy::/16 (excluding
FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where x and y represent any hexadecimal number from
0 to F. If you do not specify any IPv6 multicast group, this command displays information about all IPv6
multicast groups created based on the configured MLD SSM mappings.
interface-type interface-number: Specifies an interface by its type and number. If you do not specify any
interface, this command displays the multicast group information created based on the configured MLD
SSM mappings on all interfaces.
verbose: Displays the detailed multicast group information created based on the configured MLD SSM
mappings.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display detailed information about IPv6 multicast group FF3E::101 created based on the configured
MLD SSM mappings on all interfaces.