R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Command Reference

299
Examples
# Enable the MLD host tracking function globally.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] host-tracking
Related commands
mld host-tracking.
last-listener-query-interval (MLD view)
Use last-listener-query-interval to configure the MLD last listener query interval globally.
Use undo last-listener-query-interval to restore the default.
Syntax
last-listener-query-interval interval
undo last-listener-query-interval
Default
The MLD last listener query interval is 1 second.
Views
MLD view
Default command level
2: System level
Parameters
interval: Specifies an MLD last listener query interval (time that the device waits between sending MLD
multicast-address-specific queries) in seconds, in the range of 1 to 5.
Examples
# Set the MLD last listener query interval to 3 seconds globally.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] last-listener-query-interval 3
Related commands
• display mld interface
• mld last-listener-query-interval
• robust-count
max-response-time (MLD view)
Use max-response-time to configure the maximum response time for MLD general queries globally.
Use undo max-response-time to restore the default.
Syntax
max-response-time interval