R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Command Reference

300
undo max-response-time
Default
The maximum response delay for MLD general queries is 10 seconds.
Views
MLD view
Default command level
2: System level
Parameters
interval: Specifies the maximum response time for MLD general query messages in seconds, in the range
of 1 to 25.
Examples
# Set the maximum response delay for MLD general queries to 8 seconds globally.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] max-response-time 8
Related commands
• display mld interface
• mld max-response-time
• timer other-querier-present
mld
Use mld to enter MLD view.
Use undo mld to remove the configurations made in MLD view.
Syntax
mld
undo mld
Views
System view
Default command level
2: System level
Usage guidelines
This command can take effect only after IPv6 multicast routing is enabled on the device.
Examples
# Enable IPv6 multicast routing and enter MLD view.
<Sysname> system-view
[Sysname] multicast ipv6 routing-enable
[Sysname] mld
[Sysname-mld]