R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Command Reference

30
In Layer 2 Ethernet interface view or Layer 2 aggregate interface view, this command takes effect only if
the interface belongs to the specified VLAN. In port group view, this command takes effect only on those
ports in this port group that belong to the specified VLAN.
Examples
# Configure GigabitEthernet2/0/1 in VLAN 2 as a static router port.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] igmp-snooping static-router-port vlan 2
Related commands
subvlan
igmp-snooping version
Use igmp-snooping version to specify the IGMP snooping version.
Use undo igmp-snooping version to restore the default.
Syntax
igmp-snooping version version-number
undo igmp-snooping version
Default
The IGMP snooping version is IGMPv2 snooping.
Views
VLAN view
Default command level
2: System level
Parameters
version-number: Specifies an IGMP snooping version, 2 or 3.
Usage guidelines
This command can take effect only if IGMP snooping is enabled in the VLAN.
Examples
# Enable IGMP snooping and specify the IGMP snooping version to IGMPv3 snooping in VLAN 2.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping version 3
Related commands
igmp-snooping enable