R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Command Reference

420
Default
Private AS numbers can be carried in outbound IPv6 MBGP update packets.
Views
IPv6 MBGP address family view
Default command level
2: System level
Parameters
ipv6-group-name: Specifies an IPv6 MBGP peer group by its name, a string of 1 to 47 characters.
ipv6-address: Specifies an IPv6 MBGP peer by its IPv6 address.
Usage guidelines
The command does not take effect for IPv6 MBGP updates with both public and private AS numbers. The
range of private AS numbers is from 64512 to 65535.
Examples
# Disable updates sent to IPv6 MBGP peer 1:2::3:4 from carrying private AS numbers.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 as-number 100
[Sysname-bgp-af-ipv6] quit
[Sysname-bgp] ipv6-family multicast
[Sysname-bgp-af-ipv6-mul] peer 1:2::3:4 enable
[Sysname-bgp-af-ipv6-mul] peer 1:2::3:4 public-as-only
peer reflect-client (IPv6 MBGP address family view)
Use peer reflect-client to configure the router as a route reflector and specify an IPv6 MBGP peer or a
peer group as its client.
Use undo peer reflect-client to remove the configuration.
Syntax
peer { ipv6-group-name | ipv6-address } reflect-client
undo peer { ipv6-group-name | ipv6-address } reflect-client
Default
Neither route reflector nor client is configured.
Views
IPv6 MBGP address family view
Default command level
2: System level
Parameters
ipv6-group-name: Specifies an IPv6 MBGP peer group by its name, a string of 1 to 47 characters.
ipv6-address: Specifies an IPv6 MBGP peer by its IPv6 address.