R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Command Reference

426
Usage guidelines
To perform IPv6 MBGP soft-reset, all routers in the network should support route-refresh. If a peer does not
support route refresh, you must use the peer keep-all-routes command on the local router to save all route
updates from the peers before a soft reset.
Examples
# Soft-reset the IPv6 MBGP connections in the inbound direction.
<Sysname> refresh bgp ipv6 multicast all import
reset bgp ipv6 multicast
Use reset bgp ipv6 multicast to reset specified IPv6 MBGP connections to reconnect to the peers.
Syntax
reset bgp ipv6 multicast { as-number | ipv6-address [ flap-info ] | all | group ipv6-group-name |
external | internal }
Views
User view
Default command level
2: System level
Parameters
as-number: Specifies an AS by its number.
ipv6-address: Specifies a peer by its IPv6 address.
flap-info: Specifies routing flap information.
all: Specifies all IPv6 MBGP connections.
group ipv6-group-name: Specifies an IPv6 MBGP peer group by its name.
external: Specifies all EBGP connections.
internal: Specifies all IBGP connections.
Examples
# Reset all IPv6 MBGP connections.
<Sysname> reset bgp ipv6 multicast all
reset bgp ipv6 multicast dampening
Use reset bgp ipv6 multicast dampening to clear route dampening information and release suppressed
routes.
Syntax
reset bgp ipv6 multicast dampening [ ipv6-address prefix-length ]
Views
User view
Default command level
1: M o n i t o r l ev e l