R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Command Reference

74
Table 21 Command output
Field Descri
p
tion
VPN-Instance: public net Public network.
Group Multicast group address.
Source list List of multicast source addresses.
Related commands
ssm-mapping
display igmp ssm-mapping group
Use display igmp ssm-mapping group to display the multicast group information created based on the
configured IGMP SSM mappings.
Syntax
display igmp [ all-instance | vpn-instance vpn-instance-name ] ssm-mapping group [ group-address |
interface interface-type interface-number ] [ verbose ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all-instance: Specifies all MPLS L3VPNs.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters.
group-address: Specifies a multicast group address in the range of 224.0.1.0 to 239.255.255.255. If you
do not specify any multicast group, the command displays the information of all multicast groups created
based on the configured IGMP SSM mappings.
interface interface-type interface-number: Specifies an interface by its type and number. If you do not
specify any interface, the command displays the multicast group information created based on the
configured IGMP SSM mappings on all the interfaces.
verbose: Displays the detailed multicast group information created based on the configured IGMP SSM
mappings.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.