R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Configuration Guide
Table Of Contents
- Title Page
- Contents
- Multicast overview
- Configuring IGMP snooping
- Overview
- IGMP snooping configuration task list
- Configuring basic IGMP snooping functions
- Configuring IGMP snooping port functions
- Configuring IGMP snooping querier
- Configuring IGMP snooping proxying
- Configuring IGMP snooping policies
- Configuration prerequisites
- Configuring a multicast group filter
- Configuring multicast source port filtering
- Enabling dropping unknown multicast data
- Enabling IGMP report suppression
- Setting the maximum number of multicast groups that a port can join
- Enabling multicast group replacement
- Setting the 802.1p precedence for IGMP messages
- Enabling the IGMP snooping host tracking function
- Displaying and maintaining IGMP snooping
- IGMP snooping configuration examples
- Troubleshooting IGMP snooping
- Appendix
- Configuring multicast routing and forwarding
- Overview
- Configuration task list
- Enabling IP multicast routing
- Configuring multicast routing and forwarding
- Displaying and maintaining multicast routing and forwarding
- Configuration examples
- Troubleshooting multicast routing and forwarding
- Configuring IGMP
- Overview
- IGMP configuration task list
- Configuring basic IGMP functions
- Adjusting IGMP performance
- Configuring IGMP SSM mapping
- Configuring IGMP proxying
- Displaying and maintaining IGMP
- IGMP configuration examples
- Troubleshooting IGMP
- Configuring PIM
- Overview
- Configuring PIM-DM
- Configuring PIM-SM
- Configuring BIDIR-PIM
- Configuring PIM-SSM
- Configuring common PIM features
- Displaying and maintaining PIM
- PIM configuration examples
- Troubleshooting PIM
- Configuring MSDP
- Overview
- MSDP configuration task list
- Configuring basic MSDP functions
- Configuring an MSDP peer connection
- Configuring SA message related parameters
- Displaying and maintaining MSDP
- MSDP configuration examples
- Troubleshooting MSDP
- Configuring MBGP
- MBGP overview
- Protocols and standards
- MBGP configuration task list
- Configuring basic MBGP functions
- Controlling route advertisement and reception
- Configuration prerequisites
- Configuring MBGP route redistribution
- Configuring default route redistribution into MBGP
- Configuring MBGP route summarization
- Advertising a default route to an IPv4 MBGP peer or peer group
- Configuring outbound MBGP route filtering
- Configuring inbound MBGP route filtering
- Configuring MBGP route dampening
- Configuring MBGP route attributes
- Optimizing MBGP networks
- Configuring a large scale MBGP network
- Displaying and maintaining MBGP
- MBGP configuration example
- Configuring multicast VPN
- Overview
- How MD-VPN works
- Multicast VPN configuration task list
- Configuring MD-VPN
- Configuring BGP MDT
- Specifying the source IP address for multicast across VPNs
- Displaying and maintaining multicast VPN
- Multicast VPN configuration examples
- Troubleshooting MD-VPN
- Configuring IPv6 multicast routing and forwarding
- Overview
- Configuration task list
- Enabling IPv6 multicast routing
- Configuring IPv6 multicast routing and forwarding
- Displaying and maintaining IPv6 multicast routing and forwarding
- IPv6 multicast forwarding over GRE tunnel configuration example
- Troubleshooting abnormal termination of IPv6 multicast data
- Configuring MLD
- Overview
- MLD configuration task list
- Configuring basic MLD functions
- Adjusting MLD performance
- Configuring MLD SSM mapping
- Configuring MLD proxying
- Displaying and maintaining MLD
- MLD configuration examples
- Troubleshooting MLD
- Configuring IPv6 PIM
- Overview
- Configuring IPv6 PIM-DM
- Configuring IPv6 PIM-SM
- Configuring IPv6 BIDIR-PIM
- Configuring IPv6 PIM-SSM
- Configuring common IPv6 PIM features
- Displaying and maintaining IPv6 PIM
- IPv6 PIM configuration examples
- Troubleshooting IPv6 PIM
- Configuring IPv6 MBGP
- Overview
- IPv6 MBGP configuration task list
- Configuring basic IPv6 MBGP functions
- Controlling route distribution and reception
- Configuration prerequisites
- Injecting a local IPv6 MBGP route
- Configuring IPv6 MBGP route redistribution
- Configuring IPv6 MBGP route summarization
- Advertising a default route to a peer or peer group
- Configuring outbound IPv6 MBGP route filtering
- Configuring inbound IPv6 MBGP route filtering
- Configuring IPv6 MBGP route dampening
- Configuring IPv6 MBGP route attributes
- Optimizing IPv6 MBGP networks
- Configuring a large scale IPv6 MBGP network
- Displaying and maintaining IPv6 MBGP
- IPv6 MBGP configuration example
- Configuring PIM snooping
- Configuring multicast VLANs
- Support and other resources
- Index
151
[RouterB] interface gigabitethernet 2/1/0
[RouterB-GigabitEthernet2/1/0] pim sm
[RouterB-GigabitEthernet2/1/0] quit
[RouterB] interface gigabitethernet 2/1/1
[RouterB-GigabitEthernet2/1/1] pim sm
[RouterB-GigabitEthernet2/1/1] quit
[RouterB] interface gigabitethernet 2/1/2
[RouterB-GigabitEthernet2/1/2] pim sm
[RouterB-GigabitEthernet2/1/2] quit
[RouterB] interface gigabitethernet 2/1/4
[RouterB-GigabitEthernet2/1/4] pim sm
[RouterB-GigabitEthernet2/1/4] quit
# Enable IP multicast routing, administrative scoping, and PIM-SM on Router C, Router D, Router
F, Router G, and Router H in the same way. (Details not shown.)
4. Configure an admin-scope zone boundary:
# On Router B, configure GigabitEthernet 2/1/2 and GigabitEthernet 2/1/4 as the boundary of
admin-scope zone 1.
[RouterB] interface gigabitethernet 2/1/2
[RouterB-GigabitEthernet2/1/2] multicast boundary 239.0.0.0 8
[RouterB-GigabitEthernet2/1/2] quit
[RouterB] interface gigabitethernet 2/1/4
[RouterB-GigabitEthernet2/1/4] multicast boundary 239.0.0.0 8
[RouterB-GigabitEthernet2/1/4] quit
# On Router C, configure GigabitEthernet 2/1/2 and GigabitEthernet 2/1/4 as the boundary of
admin-scope zone 2.
<RouterC> system-view
[RouterC] interface gigabitethernet 2/1/2
[RouterC-GigabitEthernet2/1/2] multicast boundary 239.0.0.0 8
[RouterC-GigabitEthernet2/1/2] quit
[RouterC] interface gigabitethernet 2/1/4
[RouterC-GigabitEthernet2/1/4] multicast boundary 239.0.0.0 8
[RouterC-GigabitEthernet2/1/4] quit
# On Router D, configure GigabitEthernet 2/1/2 as the boundary of admin-scope zone 2.
<RouterD> system-view
[RouterD] interface gigabitethernet 2/1/2
[RouterD-GigabitEthernet2/1/2] multicast boundary 239.0.0.0 8
[RouterD-GigabitEthernet2/1/2] quit
5. Configure C-BSRs and C-RPs:
# On Router B, configure the service scope of RP advertisements and configure GigabitEthernet
2/1/1 as a C-BSR and C-RP of admin-scope zone 1.
[RouterB] acl number 2001
[RouterB-acl-basic-2001] rule permit source 239.0.0.0 0.255.255.255
[RouterB-acl-basic-2001] quit
[RouterB] pim
[RouterB-pim] c-bsr group 239.0.0.0 8
[RouterB-pim] c-bsr gigabitethernet 2/1/1
[RouterB-pim] c-rp gigabitethernet 2/1/1 group-policy 2001