R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Configuration Guide

165
Configuring MSDP
For more information about the concepts of designated router (DR), bootstrap router (BSR),
candidate-BSR (C-BSR), rendezvous point (RP), candidate-RP (C-RP), shortest path tree (SPT) and
rendezvous point tree (RPT) mentioned in this document, see "Configuring PIM."
Overview
MSDP is an inter-domain multicast solution that addresses the interconnection of protocol independent
multicast sparse mode (PIM-SM) domains. It discovers multicast source information in other PIM-SM
domains.
In the basic PIM-SM mode, a multicast source registers only with the RP in the local PIM-SM domain, and
the multicast source information about a domain is isolated from that of another domain. As a result, the
RP obtains the source information only within the local domain, and a multicast distribution tree is built
only within the local domain to deliver multicast data from a local multicast source to local receivers.
MSDP enables the RPs of different PIM-SM domains to share their multicast source information, so that the
local RP can join multicast sources in other domains. This allows multicast data to be transmitted among
different domains.
With MSDP peer relationships established between appropriate routers in the network, the RPs of
different PIM-SM domains are interconnected with one another. These MSDP peers exchange source
active (SA) messages, so that the multicast source information is shared among these different domains.
MSDP is applicable only if the intra-domain multicast protocol is PIM-SM. MSDP is meaningful only for
the ASM model.
How MSDP works
MSDP peers
One or more pairs of MSDP peers in the network forms an MSDP interconnection map, where the RPs of
different PIM-SM domains interconnect in a series. An SA message, that an RP sends and these MSDP
peers relay, can be delivered to all other RPs.