R3102-R3103-HP 6600/HSR6600 Routers IP Multicast Configuration Guide

273
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter Ethernet interface/Layer
2 aggregate interface view or
port group view.
• Enter Ethernet interface/Layer 2
aggregate interface view:
interface interface-type
interface-number
• Enter port group view:
port-group manual
port-group-name
In Ethernet interface view or Layer
2 aggregate interface view, the
configuration is effective on only
the current interface. In port group
view, the configuration is effective
on all ports in the port group.
3. Configure a static multicast
MAC address entry.
mac-address multicast
mac-address vlan vlan-id
No static multicast MAC address
entries exist by default.
For more information about the
mac-address multicast command,
see IP Multicast Command
Reference.
Displaying and maintaining IPv6 multicast routing
and forwarding
CAUTION:
The reset commands might cause IPv6 multicast transmission failures.
To display and maintain IPv6 multicast routing and forwarding:
Task Command Remarks
Display IPv6 multicast
boundary information.
display multicast ipv6 boundary { group
[ ipv6-group-address [ prefix-length ] ] | scope
[ scope-id ] } [ interface interface-type
interface-number ] [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display information about
the IPv6 multicast
forwarding table.
display multicast ipv6 forwarding-table
[ ipv6-source-address [ prefix-length ] |
ipv6-group-address [ prefix-length ] |
incoming-interface { interface-type
interface-number | register } | outgoing-interface
{ exclude | include | match } { interface-type
interface-number | register } | statistics | slot
slot-number ] * [ port-info ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display the DF information
of the IPv6 multicast
forwarding table.
display multicast ipv6 forwarding-table df-info
[ rp-address ] [ slot slot-number ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
For more information
about DF, see
"Configuring IPv6 PIM."