R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - LAN Switching Command Reference

28
GE4/0/21 U 32768 1
GE4/0/22 U 32768 1
GE4/0/23 U 63 1
Table 9 Command output
Field Descri
p
tion
Loadsharing Type
Load sharing type:
• Shar—Load sharing.
• NonS—Non-load sharing.
Port Status Port state: Selected or unselected.
Flags
LACP state flags. This field is one byte long, represented by ABCDEFGH from the
least significant bit to the most significant bit. The letter is present when its bit is 1
and absent when its bit is 0.
• A—Whether LACP is enabled. 1 indicates enabled, and 0 indicates disabled.
• B—Whether the LACP timeout is short timeout or long timeout. 1 indicates
short timeout, and 0 indicates long timeout.
• C—Whether the sending system detects that the link is aggregatable. 1
indicates yes, and 0 indicates no.
• D—Whether the sending system detects that the link is synchronized. 1
indicates yes, and 0 indicates no.
• E—Whether the sending system detects that the incoming frames are
collected. 1 indicates yes, and 0 indicates no.
• F—Whether the sending system detects that the outgoing frames are
distributed. 1 indicates yes, and 0 indicates no.
• G—Whether the sending system receives frames in default state. 1 indicates
yes, and 0 indicates no.
• H—Whether the sending system receives frames in expired state. 1 indicates
yes, and 0 indicates no.
Aggregation Interface Name of the aggregate interface.
Aggregation Mode
Mode of the aggregation group:
• Static for static aggregation.
• Dynamic for dynamic aggregation.
System ID
Local system ID, comprising the system LACP priority and the system MAC
address.
Local Information about the local end.
Port Port type and number.
Status Port state: selected or unselected.
Priority Port aggregation priority.
Oper-Key Operational key.
Flag LACP protocol state flag.
Remote Information about the remote end.
Actor Local port type and number.
Partner Remote port index.