R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - LAN Switching Command Reference

33
link-aggregation mode
Use link-aggregation mode dynamic to configure an aggregation group to operate in dynamic
aggregation mode.
Use undo link-aggregation mode to restore the default setting.
Syntax
link-aggregation mode dynamic
undo link-aggregation mode
Default
An aggregation group operates in static aggregation mode.
Views
Layer 2 aggregate interface view, Layer 3 aggregate interface view
Default command level
2: System level
Usage guidelines
To change the aggregation mode of an aggregation group that contains member ports, remove all the
member ports from the aggregation group first.
Examples
# Configure the aggregation group corresponding to Bridge-Aggregation 1 to operate in dynamic
aggregation mode.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] link-aggregation mode dynamic
link-aggregation port-priority
Use link-aggregation port-priority to set the aggregation priority of a port.
Use undo link-aggregation port-priority to restore the default setting.
Syntax
link-aggregation port-priority port-priority
undo link-aggregation port-priority
Default
The aggregation priority of a port is 32768.
Views
Ethernet interface view
Default command level
2: System level