R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - LAN Switching Configuration Guide

194
Ste
p
Command Remarks
3. Configure one
CVLAN marking
action for a local
SVLAN and
foreign CVLAN
pair.
a. Create a traffic behavior and enter
traffic behavior view:
traffic behavior behavior-name
b. Configure a CVLAN marking action
to replace the foreign CVLAN ID with
a local CVLAN ID:
remark customer-vlan-id vlan-id
c. Return to system view:
quit
Repeat this step to configure one
CVLAN marking action for each
local SVLAN and foreign CVLAN
pair.
4. Create a QoS
policy and enter
QoS policy view.
qos policy policy-name N/A
5. Associate the class
with the behavior.
classifier tcl-name behavior behavior-name
Repeat this step to create other
class-behavior associations.
Configuring a downlink policy for the customer-side port
The downlink policy on the customer-side port replaces local SVLAN and CVLAN pairs with foreign
SVLAN and CVLAN pairs.
To configure a downlink policy for the customer-side port:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create one class
for a local CVLAN
and SVLAN pair.
a. Create a class and enter class view:
traffic classifier tcl-name [ operator
and ]
b. Specify a local CVLAN as a match
criterion:
if-match customer-vlan-id vlan-id
c. Specify a local SVLAN as a match
criterion:
if-match service-vlan-id vlan-id
d. Return to system view:
quit
Repeat this step to create one class
for each local CVLAN and SVLAN
pair.
3. Create one VLAN
marking behavior
for a local CVLAN
and SVLAN pair.
a. Create a traffic behavior and enter
traffic behavior view:
traffic behavior behavior-name
b. Configure a CVLAN marking action
to replace the local CVLAN ID with a
foreign CVLAN ID:
remark customer-vlan-id vlan-id
c. Configure an SVLAN marking action
to replace the local SVLAN ID with a
foreign SVLAN ID:
remark service-vlan-id vlan-id
d. Return to system view:
quit
Repeat this step to create one
VLAN marking behavior for each
local CVLAN and SVLAN pair.