R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - WAN Command Reference Guide

103
Examples
# Limit the number of selected member interfaces in HDLC link bundle 1 to 8.
<Sysname> system-view
[Sysname] interface hdlc-bundle 1
[Sysname-Hdlc-bundle1] bundle max-active links 8
Related commands
• bundle min-active links
• bundle member-priority
bundle member-priority
Use bundle member-priority to set the bundling priority for an HDLC-enabled interface.
Use undo bundle member-priority to restore the default.
Syntax
bundle member-priority priority
undo bundle member-priority
Default
The bundling priority of an HDLC-enabled interface is 32768.
Views
Interface view
Default command level
2: System level
Parameters
priority: Bundling priority of an HDLC-enabled interface. The value range for this argument is 1 to 65535.
Usage guidelines
A higher priority value means a lower bundling priority.
Examples
# Set the bundling priority of HDLC-enabled interface POS 5/0/1 to 1.
<Sysname> system-view
[Sysname] interface pos 5/0/1
[Sysname-Pos5/0/1] bundle member-priority 1
bundle min-active bandwidth
Use bundle min-active bandwidth to set the minimum amount of bandwidth required to bring up the
HDLC link bundle.
Use undo bundle min-active bandwidth to remove the limit.
Syntax
bundle min-active bandwidth bandwidth
undo bundle min-active bandwidth