R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - WAN Command Reference Guide

105
Related commands
bundle max-active links
default
Use default to restore the default settings for an HDLC link bundle interface.
Syntax
default
Views
HDLC bundle interface view
Default command level
2: System level
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you execute it on a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies or system restrictions. Use the display this command in interface view to identify these
commands, and then use their undo forms or follow the command reference to individually restore their
default settings. If your restoration attempt still fails, follow the error message instructions to resolve the
problem.
Examples
# Restore the default settings for HDLC link bundle interface 1.
<Sysname> system-view
[Sysname] interface hdlc-bundle 1
[Sysname-Hdlc-bundle1] default
This command will restore the default settings. Continue? [Y/N]:y
description
Use description to configure the description of an interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
The description of an interface is the interface name followed by the Interface string, for example,
Hdlc-bundle1 Interface.
Views
HDLC link bundle interface view