R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - WAN Command Reference Guide

111
Field Descri
p
tion
Link
Physical link state of the interface:
• UP—The link is up.
• ADM—The link has been administratively shut
down. To recover its physical state, perform the
undo shutdown command.
Protocol Protocol connection state of the interface.
Main IP Main IP address of the interface.
Description Description of the interface.
Cause
Cause of a DOWN physical link. If the port has been
shut down with the shutdown command, this field
displays Administratively. To restore the physical state
of the interface, use the undo shutdown command.
interface hdlc-bundle
Use interface hdlc-bundle to create an HDLC link bundle interface and enter its view. If the HDLC link
bundle interface already exists, you enter HDLC link bundle interface view directly.
Use undo interface hdlc-bundle to remove an HDLC link bundle interface.
Syntax
interface hdlc-bundle bundle-id
undo interface hdlc-bundle bundle-id
Views
System view
Default command level
2: System level
Parameters
bundle-id: Number of an HDLC link bundle interface.
The following matrix shows the value range for the bundle-id argument:
6602 HSR6602 6604/6608/6616
1 to 6 1 to 6
• For the router with the MCP MPU installed: 1 to 12
• For the router with the RPE-X1 or RSE-X1 MPU installed:
{ 1 to 12 on 6604
{ 1 to 24 on 6608
{ 1 to 48 on 6616
Examples
# Create HDLC link bundle interface 1 and enter its view.
<Sysname> system-view
[Sysname] interface hdlc-bundle 1
[Sysname-Hdlc-bundle1]