R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - WAN Command Reference Guide

35
shutdown
Use shutdown to shut down an ATM interface.
Use undo shutdown to bring up an ATM interface.
Syntax
shutdown
undo shutdown
Default
An ATM interface is up.
Views
ATM interface view
Default command level
2: System level
Examples
# Shut down interface ATM 5/0/1.
<Sysname> system-view
[Sysname] interface atm 5/0/1
[Sysname-Atm5/0/1] shutdown
# Bring up interface ATM 5/0/1.
<Sysname> system-view
[Sysname] interface atm 5/0/1
[Sysname-Atm5/0/1] undo shutdown
transmit-priority
Use transmit-priority to assign transmission priority for an ATM PVC associated with the UBR, rt-VBR, or
nrt-VBR service. At the time of bandwidth allocation, the PVCs with higher priorities take precedence over
those with lower priorities.
Use undo transmit-priority to restore the default transmission priority.
Syntax
transmit-priority value
undo transmit-priority
Default
The transmission priority of UBR service, nrt-VBR service, and rt-VBR service are 0, 5, and 8.
Views
PVC view
Default command level
2: System level