R3102-R3103-HP 6600/HSR6600 Routers Layer 2 - WAN Configuration Guide

59
[RouterB-Serial2/0/1] ppp authentication-mode pap domain system
[RouterB-Serial2/0/1] ppp pap local-user rtb password simple rtb
[RouterB-Serial2/0/1] ppp mp virtual-template 1
[RouterB-Serial2/0/1] shutdown
[RouterB-Serial2/0/1] undo shutdown
[RouterB-Serial2/0/1] quit
# Configure local authentication for the PPP users in the default ISP domain system.
[RouterB] domain system
[RouterB-isp-system] authentication ppp local
[RouterB-isp-system] quit
3. Verify the configuration on Router A:
[RouterA] display ppp mp
Template is Virtual-Template1
Bundle rtb, 2 member, Master link is Virtual-Template1:0
0 lost fragments, 0 reordered, 0 unassigned, 0 interleaved,
sequence 0/0 rcvd/sent
The bundled member channels are:
Serial2/0/2
Serial2/0/1
4. Display the status of the VA interfaces:
[RouterA] display virtual-access
Virtual-Template1:0 current state: UP
Line protocol current state: UP
Description: Virtual-Template0:0 Interface
The Maximum Transmit Unit is 1500
Link layer protocol is PPP
LCP opened, MP opened, IPCP opened, OSICP opened
Physical is MP, baudrate: 64000 bps
Output queue : (Urgent queuing : Size/Length/Discards) 0/100/0
Output queue : (Protocol queuing : Size/Length/Discards) 0/500/0
Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0
Last 300 seconds input: 0 bytes/sec 0 packets/sec
Last 300 seconds output: 0 bytes/sec 0 packets/sec
520 packets input, 44132 bytes, 0 drops
527 packets output, 44566 bytes, 4 drops
The output on Router B is similar.
5. Ping the IP address 8.1.1.1 on Router B:
[RouterB] ping 8.1.1.1
PING 8.1.1.1: 56 data bytes, press CTRL_C to break
Reply from 8.1.1.1: bytes=56 Sequence=1 ttl=255 time=29 ms
Reply from 8.1.1.1: bytes=56 Sequence=2 ttl=255 time=31 ms
Reply from 8.1.1.1: bytes=56 Sequence=3 ttl=255 time=29 ms
Reply from 8.1.1.1: bytes=56 Sequence=4 ttl=255 time=31 ms
Reply from 8.1.1.1: bytes=56 Sequence=5 ttl=255 time=30 ms
--- 8.1.1.1 ping statistics ---
5 packet(s) transmitted