R3102-R3103-HP 6600/HSR6600 Routers Layer 3 - IP Routing Command Reference

230
10-Jul-2008 15:46:17 Down Send Notification with Error 1/1
Message Header Error/Connection Not Synchronized
10-Jul-2008 09:23:00 Up
10-Jul-2008 07:46:17 Down Receive Notification with Error 3/2
UPDATE Message Error/Unsupported optional Parameter
10-Jul-2008 06:23:00 Up
10-Jul-2008 05:46:17 Down Send Notification with Error 6/4
Cease/Administrative Reset
Table 48 Command output
Field Description
Peer IP address of the peer.
Date Date on which the Notification was sent or received.
Time Time at which the Notification was sent or received.
State
BGP session state:
• Up—The BGP session is up.
• Down—The BGP session is down.
Notification Error code and subcode of the Notification message.
Error/SubError
Error refers to the error code, which identifies the type
of the Notification.
SubError refers to the error subcode of the
Notification, which identifies the specific information
about the reported error.
display bgp peer received ip-prefix
Use display bgp peer received ip-prefix to display the prefix information in the ORF message from the
specified BGP peer.
Syntax
display bgp peer ip-address received ip-prefix [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ip-address: Specifies a BGP peer by its IP address.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.