R3102-R3103-HP 6600/HSR6600 Routers Layer 3 - IP Routing Command Reference

370
[Sysname] ospfv3 100
[Sysname-ospfv3-100] import-route ospfv3 160
log-peer-change
Use log-peer-change to enable the logging on neighbor state changes.
Use undo log-peer-change to disable the logging.
Syntax
log-peer-change
undo log-peer-change
Views
OSPFv3 view
Default command level
2: System level
Usage guidelines
With this feature enabled, information about neighbor state changes of the current OSPFv3 process will
display on the configuration terminal.
Examples
# Disable the logging on neighbor state changes of OSPFv3 process 100.
<Sysname> system-view
[Sysname] ospfv3 100
[Sysname-ospfv3-100] undo log-peer-change
nssa (OSPFv3 area view)
Use nssa to configure an area as an NSSA area.
Use undo nssa to restore the default.
Syntax
nssa [ default-route-advertise [ cost cost | type type ]
*
| no-import-route | no-summary | suppress-fa
| { translate-always | translate-never } | translator-stability-interval value ] *
undo nssa
Default
No area is configured as an NSSA area.
Views
OSPFv3 area view
Default command level
2: System level
Parameters
default-route-advertise: Used on an NSSA ABR or an ASBR only. If it is configured on an NSSA ABR, the
ABR generates a default route in an NSSA-external-LSA into the NSSA area regardless of whether a