R3102-R3103-HP 6600/HSR6600 Routers Layer 3 - IP Services Command Reference

206
Views
System view
Default command level
2: System level
Examples
# Enable sending ICMPv6 destination unreachable packets.
<Sysname> system-view
[Sysname] ipv6 unreachables enable
local-proxy-nd enable
Use local-proxy-nd enable to enable local ND proxy.
Use undo local-proxy-nd enable to restore the default.
Syntax
local-proxy-nd enable
undo local-proxy-nd enable
Default
Local ND proxy is disabled.
Views
VLAN interface view, Layer 3 Ethernet interface view, Layer 3 Ethernet subinterface view
Default command level
2: System level
Examples
# Enable local ND proxy on interface GigabitEthernet 3/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 3/0/1
[Sysname-GigabitEthernet3/0/1] local-proxy-nd enable
reset ipv6 neighbors
Use reset ipv6 neighbors to clear IPv6 neighbor information.
Syntax
reset ipv6 neighbors { all | dynamic | interface interface-type interface-number | slot slot-number |
static }
Views
User view
Default command level
2: System level
Parameters
all: Clears static and dynamic neighbor information on all interfaces.