R3102-R3103-HP 6600/HSR6600 Routers Layer 3 - IP Services Command Reference

209
Views
User view
Default command level
1: Monitor level
Usage guidelines
You can use the display udp ipv6 statistics command to display the statistics of IPv6 UDP packets.
Examples
# Clear the statistics of all IPv6 UDP packets.
<Sysname> reset udp ipv6 statistics
tcp ipv6 timer fin-timeout
Use tcp ipv6 timer fin-timeout to set the finwait timer for IPv6 TCP connections.
Use undo tcp ipv6 timer fin-timeout to restore the default.
Syntax
tcp ipv6 timer fin-timeout wait-time
undo tcp ipv6 timer fin-timeout
Default
The finwait timer is 675 seconds.
Views
System view
Default command level
2: System level
Parameters
wait-time: Sets the finwait timer for IPv6 TCP connections in seconds, in the range of 76 to 3600.
Examples
# Set the finwait timer of IPv6 TCP connections to 800 seconds.
<Sysname> system-view
[Sysname] tcp ipv6 timer fin-timeout 800
tcp ipv6 timer syn-timeout
Use tcp ipv6 timer syn-timeout to set the synwait timer for IPv6 TCP connections.
Use undo tcp ipv6 timer syn-timeout to restore the default.
Syntax
tcp ipv6 timer syn-timeout wait-time
undo tcp ipv6 timer syn-timeout
Default
The synwait timer of IPv6 TCP connections is 75 seconds.