R3102-R3103-HP 6600/HSR6600 Routers Layer 3 - IP Services Command Reference

279
Views
Tunnel interface view
Default command level
2: System level
Parameters
mtu-size: MTU for IPv4 packets on the interface, in the range of 100 to 2000 bytes.
Examples
# Set the MTU for IPv4 packets on the interface Tunnel 3 to 1000 bytes.
<Sysname> system-view
[Sysname] interface tunnel 3
[Sysname-Tunnel3] mtu 1000
reset counters interface
Use reset counters interface to clear the statistics of tunnel interfaces.
Syntax
reset counters interface [ tunnel [ number ] ]
Views
User view
Default command level
2: System level
Parameters
number: Tunnel interface number.
Usage guidelines
If you want to observe new traffic statistics on a tunnel interface, you can use this command to clear old
statistics:
• If you do not specify any parameters, this command clears the statistics for all interfaces.
• If you specify only the tunnel keyword, this command clears the statistics for all tunnel interfaces.
• If you specify both the tunnel keyword and the number argument, this command clears the statistics
for the specified tunnel interface.
Examples
# Clear the statistics for the interface Tunnel 3.
<Sysname> reset counters interface tunnel 3
service
Use service to specify the service card for forwarding the traffic on the current tunnel interface.
Use undo service to restore the default.
Syntax
service slot slot-number