R3102-R3103-HP 6600/HSR6600 Routers Layer 3 - IP Services Configuration Guide

113
Configuring the load sharing mode
CAUTION:
HP recommends you to configure the load sharing mode when no traffic passes through the device to
avoid impact on some services.
If a routing protocol finds multiple equal-cost best routes to a destination, the router forwards packets over
the equal-cost routes to implement load sharing. You can configure the device to identify flows by packet
information such as source and destination IP addresses.
To configure the load sharing mode:
Ste
p
Command
1. Enter system view.
system-view
2. Configure the load sharing mode.
ip load-sharing mode { all | slot slot-number } per-flow [ dest-ip |
src-ip ]