R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

98
Field Descri
p
tion
BindFrrFaultCounter
Number of primary-to-bypass tunnel binding failures
in the FRR process.
display mpls static-cr-lsp
Use display mpls static-cr-lsp to display information about static CR-LSPs.
Syntax
display mpls static-cr-lsp [ lsp-name lsp-name ] [ egress | ingress | transit ] [ { include | exclude }
ip-address prefix-length ] [ verbose ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
lsp-name lsp-name: Label switched path name comprising 1 to 15 characters.
egress: Displays static CR-LSPs taking the current device as the egress node.
ingress: Displays static CR-LSPs taking the current device as the ingress node.
transit: Displays static CR-LSPs taking the current device as a transit node.
include: Displays only CR-LSPs with the destination IP address specified by the ip-address prefix-length
arguments.
exclude: Displays only CR-LSPs with destination IP addresses other than the one specified by the
ip-address prefix-length arguments.
ip-address: IP address of the FEC.
prefix-length: IP address prefix length in the range of 0 to 32.
verbose: Displays detailed information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
• begin: Displays the first line that matches the specified regular expression and all lines that follow.
• exclude: Displays all lines that do not match the specified regular expression.
• include: Displays all lines that match the specified regular expression.
• regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display brief information about all static CR-LSPs.
<Sysname> display mpls static-cr-lsp
total statics-cr-lsp : 1
Name FEC I/O Label I/O If State
abc -/- 60/NULL GE2/1/1/- Down