R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

190
Idle Code : 0x99
Client Intf : Seria2/0:0 is up
Local Group ID : 0
Remote Group ID : 0
Local VC Label : 1029/1030
Remote VC Label : 1029/1030
Tunnel Policy : -
Tunnel Type : lsp
Tunnel ID : 0x220020
Local VCCV CC Type : CW, RA
Local VCCV CV Type : LSPV
Remote VCCV CC Type : RA
Remote VCCV CV Type : LSPV
Table 71 Command output
Field Descri
p
tion
VC ID Remote VC ID.
VC State Status of the VC.
Destination Destination IP address.
CEM Class CEM class referenced by the interface.
Jitter Buffer Size In milliseconds.
Payload Size Size of the payload of a packet, in bytes.
Idle Code Padding string to be used in case of packet loss.
Client Intf Interface connected to the CE.
Local Group ID Local VC group ID.
Remote Group ID Remote VC group ID.
Tunnel Policy
Name of the tunneling policy used by the VC. If no tunneling policy is
specified for the VC, this field displays a hyphen (-).
Tunnel Type Type of the tunnel.
Tunnel ID ID of the tunnel.
Local VCCV CC Type
Virtual Circuit Connectivity Verification (VCCV) control channel types
supported on the local end, including:
• CW—Control word.
• RA—Router alert (RA) label.
VCCV is a technology like ping. It is used to check the connectivity of
L2VPN PWs.
Local VCCV CV Type
VCCV connectivity verification types supported on the local end.
Only LSPV is supported, indicating that MPLS LSP ping is used to
check the PW connectivity.
Remote VCCV CC Type VCCV control channel types supported on the remote end.
Remote VCCV CV Type VCCV connectivity verification types supported on the remote end.
Backup VC Information about the backup VC link.