R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

237
Usage guidelines
• If you specify an interface, the command displays the AC entries of the VPLS connection created on
the Layer 3 interface.
• If you do not specify any parameter, the command displays the AC entries of all VPLS connections.
Examples
# Display the AC entry information for all VPLS instances.
<Sysname> display mpls l2vpn fib ac vpls
Total VSI Entry:1 Total AC Entry:1
In Interface ServID VSIName VSIIndex LinkID
--------------------------------------------------------------------
GigabitEthernet2/1/0 vsi1 1 1
Table 93 Command output
Field Descri
p
tion
Total VSI Entry
Total number of VSI entries, which is displayed only when
you display all VPLS AC entries.
Total AC Entry
Total number of VPLS AC entries, which is displayed only
when you display all VPLS AC entries.
In Interface Incoming interface—the interface bound to an L2VPN.
VSIName VPLS instance name.
VSIIndex VPLS instance index.
LinkID Link ID of an AC in the VPLS instance.
# Display detailed AC entry information about all VPLS instances.
<Sysname> display mpls l2vpn fib ac vpls verbose
Total VSI Entry:1 Total AC Entry:1
VSI Name: vsi1 VSI Index: 0
**In Interface : GE2/1/0
Service Instance ID :
Link ID : 65
Access Mode : Vlan
CE Type : ----
AC Encapsulation : ----
GR Count : 1
Table 94 Command output
Field Descri
p
tion
Total VSI Entry
Total number of VSI entries, which is displayed only when
you display all VPLS AC entries.
Total AC Entry
Total number of VPLS AC entries, which is displayed only
when you display all VPLS AC entries.
VSI Name Name of the VPLS instance.
VSI Index Index of the VPLS instance.