R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

345
tunnel-policy
Use tunnel-policy to establish a tunneling policy and enter tunneling policy view.
Use undo tunnel-policy to delete a tunneling policy.
Syntax
tunnel-policy tunnel-policy-name
undo tunnel-policy tunnel-policy-name
Views
System view
Default command level
2: System level
Parameters
tunnel-policy-name: Name for the tunneling policy, a string of 1 to 19 characters.
Examples
# Establish a tunneling policy named po1 and enter tunneling policy view.
<Sysname> system-view
[Sysname] tunnel-policy po1
[Sysname-tunnel-policy-po1]
Related commands
tunnel select-seq
vpn popgo
Use vpn popgo on an egress PE to specify the VPN label processing mode as POPGO forwarding, which
will pop the label and then search for the outbound interface according to the label to forward the traffic.
Use undo vpn popgo to restore the default.
Syntax
vpn popgo
undo vpn popgo
Default
The VPN label processing mode of an egress PE is POP forwarding, which will pop the label and then
search the FIB table to find the outbound interface to forward the traffic.
Views
System view
Default command level
2: System level
Usage guidelines
After you execute the vpn popgo or undo vpn popgo command on the device, you must reboot the device
to validate the configuration.