R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

65
reset mpls statistics lsp in-label
Use reset mpls statistics lsp in-label to clear LSP statistics according to the LSP incoming label.
Syntax
reset mpls statistics lsp [ in-label in-label ]
Views
User view
Default command level
1: Monitor level
Parameters
in-label in-label: Specifies an LSP by its incoming label.
The following matrix shows the value ranges for the in-label argument:
6602 HSR6602 6604/6608/6616
0 to 57343 0 to 57343
With RSE-X1: 0 to 97279
With other MPUs: 0 to 57343
Examples
# Clear statistics for the LSP with the incoming label of 1024.
<Sysname> reset mpls statistics lsp in-label 1024
Related commands
display mpls statistics lsp in-label
reset mpls statistics tunnel
Use reset mpls statistics tunnel to clear statistics for one or all public network tunnels.
Syntax
reset mpls statistics tunnel [ token token ]
Views
User view
Default command level
1: Monitor level
Parameters
token token: Specifies an LSP token to clear statistics of the public network tunnel with the specified LSP
token. The value range for the token is 0 to 4294967295.
Examples
# Clear statistics for the public network tunnel with the LSP token of 2.
<Sysname> reset mpls statistics tunnel token 2