R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

74
Syntax
delete hop ip-address
Views
Explicit path view
Default command level
2: System level
Parameters
ip-address: Specifies the IP address of a node along the explicit path.
Examples
# Remove the node identified by 10.0.0.1 from the explicit path path1.
<Sysname> system-view
[Sysname] explicit-path path1
[Sysname-explicit-path-path1] delete hop 10.0.0.1
display explicit-path
Use display explicit-path to display information about an explicit path.
Syntax
display explicit-path [ path-name ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
path-name: Specifies a path name, a string of 1 to 31 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no path name is specified, information about all explicit paths is displayed.
Examples
# Display information about all explicit paths.
<Sysname> display explicit-path
Path Name : ErHop-Path1 Path Status : Enabled
1 1.1.1.10 Strict Include
2 2.1.1.10 Strict Include