R3102-R3103-HP 6600/HSR6600 Routers MPLS Configuration Guide

112
BC [ 1] = 0 bytes/sec
------------------------------------------------
LSA [ 2 ]
------------------------------------------------
LSA Type : Opq-Area
Opaque Type : 1
Opaque ID : 0
Advertising Router ID : 1.1.1.9
LSA Age : 1118
Length : 28
LSA Options : E O
LS Seq Number : 8000000B
CheckSum : ECBF
MPLS TE Router ID : 1.1.1.9
8. Create a static route to direct traffic to the MPLS TE tunnel:
[RouterA] ip route-static 30.1.1.2 24 tunnel 2 preference 1
Execute the display ip routing-table command on Router A. You can see a static route entry with
Tunnel2 as the outgoing interface.
CR-LSP backup configuration example
Network requirements
Set up an MPLS TE tunnel from Router A to Router C. Use CR-LSP hot backup for it.