R3102-R3103-HP 6600/HSR6600 Routers MPLS Configuration Guide

409
Task Command Remarks
Display BGP VPNv6 routing
information for a specific VPN
instance.
display bgp vpnv6 vpn-instance
vpn-instance-name routing-table
[ network-address prefix-length
[ longer-prefixes ] | peer ipv6-address
{ advertised-routes | received-routes } ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
For commands that display information about a routing table, see Layer 3—IP Routing Command
Reference.
IPv6 MPLS L3VPN configuration examples
Configuring IPv6 MPLS L3VPNs
Network requirements
CE 1 and CE 3 belong to VPN 1. CE 2 and CE 4 belong to VPN 2.
VPN 1 uses route target attributes 111:1. VPN 2 uses route target attributes 222:2. Users of different VPNs
cannot access each other.
EBGP is used to exchange VPN routing information between CEs and PEs.
PEs use OSPF to communicate with each other and use MP-IBGP to exchange VPN routing information.