R3102-R3103-HP 6600/HSR6600 Routers MPLS Configuration Guide

417

bytes=56 Sequence=5 hop limit=64 time = 1 ms

--- 2001:3::1 ping statistics ---

5 packet(s) transmitted

5 packet(s) received

0.00% packet loss

round-trip min/avg/max = 1/1/1 ms

[CE1] ping ipv6 2001:4::1

PING 2001:4::1 : 56 data bytes, press CTRL_C to break

Request time out

--- 2001:4::1 ping statistics ---

5 packet(s) transmitted

0 packet(s) received

100.00% packet loss

round-trip min/avg/max = 0/0/0 ms

Configuring an IPv6 MPLS L3VPN that uses a GRE tunnel

Network requirements

CE 1 and CE 2 belong to VPN 1. The PEs support MPLS, while the P router does not support MPLS and

provides only IP functions.

On the backbone, use a GRE tunnel to encapsulate and forward VPN packets to implement IPv6 MPLS

L3VPN.

Configure tunneling policies on the PEs and specify the tunnel type for VPN traffic as GRE.